"Non-damaging" clamping legs for the entire diameter range
Special jaws for MF4i and MF5i
Liners for easy setup
Liner extension bits for deeper setup position for TE160 and TE250
Required hand tools for installation
How does the elbow beveling machine work?
Liners hold the machine in place while fitting the elbow to the pipe. Dimension scale on the liners make centering easy. With the standard liners it is possible to install the mandrel close to the pipe end. With the help of additional liner extension bits mandrel can be installed deeper for beveling the inside diameter of the pipe. These elbow mandrel works according to the same basic principle; Mandrel is clamped to a pipe elbow via screws on the inner diameter of the mandrel housing. Each extendable leg can be adjusted individually so centering is easily done. Legs have freely rotating heads to protect the inner surface of the pipe from damage when tightening the legs.
Elbow Beveling Machine ✓ Working Range: max. 18 inch OD ✓ Liners for easy setup ✓ Easy beveling of pipe elbows ✓ Made in Germany