DWT Purge Gas Saver

for pipes and tanks

Works on all non-magnetic metals
Diameter from 300 mm
Wall thickness up to 8 mm
Saves up to 90% gas
Fast start of welding job

Item number: RG350230

Request

Description
Easy to use
Efficiency
Download

One of the time consuming and expensive operations when welding pipes, is the purging. To ensure that no oxidation occurs on the inside of the pipes mostly a purging with gas is made. This fills the pipe with gas and the pipe is continuously flushed during welding.

Imagine that you could just apply gas where the welding takes place, and that the gas inside the pipe follows the torch on the outside of the pipe.

Through the utilization of strong magnets,the Purge Gas Saver always follows the torch
Due to the 360° wheels the Purge Gas Saver can be slid sideways and through elbows
No need for attaching wires or similar tools to the Purge Gas Saver. Simply slide it out when you are finished welding

The gas consumption can be reducedby up to 90% depending on diameter and length of pipe
Avoid long flush times and uncertainty of the ppm l evel during the weld.
We offers a complete package ready to use for pipe applications.

DWT Purge Gas Saver

DOWNLOAD PDF
Download inserts for different pipe diameters

DOWNLOAD Inserts

DWT Purge Gas Saver Advantages

Strong magnets

Through the utilization of strong magnets, the Purge Gas Saver always follows the torch

colour chart pipe purging

The chart shows the respective state of corrosion depending on the oxygen content during welding

Matching it

Internal Fit up Clamp
ISC

To fix flanges and pipes
Range ID: 2,25 - 20,4"

ISC

Inside Pipe Clamp
ISEC

To fix flanges and elbows
Range ID: 2,25 - 20,4"

ISEC

Exact Pipe Saw
Inox 220

Cutting range:
15 - 220 mm OD
Max. wall thickness: Stainless steel 12,5 mm

Inox 220

Weld Purge Monitor
Oxy Pro

Specially developed for flexible use on construction sites and in the workshop.
Measuring range
5 - 999 ppm O₂

Oxy Pro

Users also searched

Stainless Steel Pipe Welding Clamps

Pipe Welding Clamps for external clamping.
3 types available
Clamping Range:
1 - 14 inch (26 - 355 mm)

Pipe Welding Clamps

External Pipe Clamp SPC

Designed to align different pipe diameters with each other.
Clamping range:
0,3 - 5,5 inch (10 - 140 mm)

SPC Clamp

Pipe Chain Clamps single

Designed for perfect welding alignment of large pipe diameters.
Clamping range:
8 - 60 inch
(203 - 1.524 mm)

Single Chains

	DWT Handelsgesellschaft für Druckluft-Werkzeug-Technik mbH Wilhelm-Tenhagen-Str. 5 46240 Bottrop Germany
	+49 (2041) 77144-0
	+49 (2041) 77144-99
	Contact Form